High quality specialized bike shop and services Baton Rouge: How do I choose the right size road bike for me? It’s important to get the right size bike. Most bikes come in a range of sizes to fit your stature and bike makers will usually publish a rider’s height range which a bike of a specific size will fit. You should feel comfortable seated on your bike and be able to put both feet flat on the ground when standing over the crossbar, without it touching you. You’ll usually find more detailed frame dimensions listed too, which give you more details of how your bike will fit you. The most important are reach and stack, although they’re a bit complex to interpret. In general, the higher the stack number (usually shown in cm or mm) the more upright your riding position will be. If you enjoy a ‘taller’ riding position then look for a more generous stack height. Equally, a shorter reach will put you closer to the bars, thus in a more upright position. For the most part, race bikes will feature a lower stack height than endurance models. Find additional information on specialized bikes.
Ride longer, farther, and with more confidence on this mid-range carbon do-it-all road bike. The carbon frame and wheels make the bike more aerodynamic when you’re riding serious mileage. It’s designed to fit wider, 35-millimeter tires, for more varied terrain, which is important for endurance rides that may venture off the beaten path, explains Judd Rench, multiple Ironman finisher/podium placer/World Championship qualifier. The bike is made out of carbon, which is extremely lightweight — but pricier than other materials. It features electronic shifting, which can be helpful on rides that involve climbing (especially combined with the featherlight weight of the bike). “The geometry of this type of bike allows the rider to be in an aerodynamic position for endurance rides but also, it’s not so aggressive that it could only be ridden for short distances at high speeds,” says Dr. Metzl. “Carbon is more costly to manufacture, hence the higher pricing compared to alloy.”
What’s the difference between race and endurance geometry? A key decision when choosing the best road bike for you is what you plan to do with it. Are you looking to go fast or race, or are you after a more comfortable bike for leisurely rides or long days in the saddle? Geometry is the key factor here. A full-on race bike will put you in a more bent-over riding position, with your head and shoulders lower down over the handlebar. That’s great when you have a need for speed, reducing your frontal profile to lower your wind resistance but can be uncomfortable, particularly for a beginner. On the other hand, bikes labelled “endurance” or “sportive” will be designed for a more upright riding position, with the bars higher and closer to the saddle. That delivers greater comfort on longer rides, but may make you a bit slower.
Trek designed the Domane+ to mimic the ride feel of a regular road bike—and we think they nailed it. The TQ motor doles out power with subtle refinement, as if we were always riding with a tailwind. It gave us a glimpse of how professional cyclists must feel when attacking mountain climbs on a solo breakaway. Orbea launched the first generation Gain e-road bike back in 2019—and we voted it our road bike (e-assist or not) of the year. Four years later, the Basque brand is launching its third generation of the platform. This time around, Orbea opted for the recently released Mahle X20 hub drive motor. The unit itself is one of the lightest on the market, but Orbea says reducing weight wasn’t the main goal. Case in point: instead of picking the lightest possible set-up and the smallest capacity battery, the Gain is equipped with Mahle’s larger 353 watt-hour battery to give riders more range and a maximum assist of 250 watts. The Gain has a maximum tire width of 35 millimeters, putting it squarely in the all-road category.
Cannondale has long been a master of performance alloy frames and the CAAD13 follows in that vein. It’s got long and low geometry based on that of the pro-level carbon SuperSix, with aero tube profiles leading to handling which is second to none. Priced low enough to be a first bike it’s a frame that you won’t outgrow. At this price point, you get a Shimano 105 hydraulic groupset with a RS510 crank set. The wheels have had a slight upgrade, so you’re now getting DT Swiss R470 rims with the Formula hubs. The only thing that we found fault with was the rather high front end stack. It’s easy to rectify but means you’ll have to have your head tube cut down to avoid an ugly stack of spacers above the stem. Find additional details at https://www.capitolcyclery.com/.
Perhaps more important to everyday riders is how the Propel feels when going fast—it’s a glorious bike to ride. It’s tangibly light and stiff—not just for an aero bike, but for a good road bike, period. The Propel is a wonderful partner on long climbing days and when you feel inspired to attack steep pitches. Sharp stabs at the pedals are rewarded with quick bursts of speed with no hint of delay or hesitation. The handling is equally precise and responsive. It feels somewhat buzzy and electric, but without being harsh or unwelcoming like many other aero road bikes. It’s a veritable eager puppy, always up for another go and brimming with more energy than you.