Premium customized led flood light wholesale provider: Do you know that there are streetlights that do not require grid power for operation? All they need is good sunlight during the day to work at night. Solar streetlights use a system of solar panels, electricity storage, and control systems to provide lighting at night. It enables off-grid lighting systems in remote areas with minimal maintenance and installation activities. They also reduce the lighting load from the grid, which accounts for 20% of the nation’s consumption. Solar streetlights have programmed PWM or other controllers that adjust LED brightness based on battery voltage, date, and real-time clock data. They are a complete lighting system with electricity storage, solar energy converters, controllers, drivers, lighting elements, and mechanical fittings. Read extra information at floodlights manufacturer.
The technology of HID lamps can be traced back to 1675, when Jean-Felix Picard discovered that his mercury barometer glows when shaken. However, the first HID commercially available bulb was made in 1965. It produces 95 lumens/watt, which is competitive with HPS and LED but also has similar omnidirectional light problems. The electricity that goes into the bulb passes through the xenon gas inside the glass chamber. It causes the xenon gas to ionize, forming an arc that vaporizes sodium and mercury to create light. The light is yellow in the range of 1900 to 2000 degrees Kelvin. These lamps have low color rendering capabilities. HID lamps also pass high electricity through a gas to create light. They require a ballast to operate. They contain tungsten electrodes inside a fused alumina arc or quartz tube. The noble gas of suitable metal or metal salt is used to enable the arc’s initial strike. They are also known as arc lamps.
The initial cost of an LED-type floodlight is higher, but it pays off early due to its> 90% electrical efficiency. Halogen lights offer more brightness than LED lights, but if we think of brightness in terms of lumens per watt of electricity consumed, LED flood lights are the clear winner. They come with metal heat sinks, which dissipate the very little heat generated during operation. It makes LED lights cooler to the human touch. Users prefer placing them in parking lots, sports fields, security fences, etc. Metal Halide – These are High-Intensity Discharge (HID) lamps. They consist of a mixture of mercury in gaseous form and metal halides (metal compounds formed with iodine or bromine). When an electric current is passed across the arc tube, gas is ionized, and as the temperature increases, the metal halides dissociate into metal atoms and halogen atoms.
The power of the High Bay Led Lights is only 20% of the sodium lamp, which is equivalent to the 100W LED high bay lamp can replace the 250W sodium lamp, especially in line with the “green low carbon” proposed by the state. Applicable occasions: shipyards, mines, workshops, factories, warehouses, highway toll stations, gas stations, large supermarkets, exhibition halls, stadiums and other places where industrial and mining lighting is required.
Our LED light fixture can be divided into indoor LED lighting and outdoor LED lighting according to the place where LED lamps are used. Indoor lighting requires high brightness, good color consistency, high color rendering, and high versatility. Outdoor lighting requires high brightness, long life, and good resistance to harsh environments. Our LED lamps feature high luminous efficiency, low energy consumption, long life, safety, and environmental protection. They can operate for more than 50,000 hours without failure, widely used in factories, warehouses, shopping malls, roads and other public places that require long-term lighting.
LED garden lights are a kind of outdoor lighting. It uses a new type of LED semiconductor as the illuminant. It usually refers to the outdoor lighting that illuminates an area less than 6 square meters. Its main components include an LED light source, enclosure, pole, and flange. The disc and the basic embedded parts are composed of 5 parts. It is mainly used to light up large-area mines, building outlines, stadiums, overpasses, monuments, parks, and flower beds. In fact, almost all large-area lighting fixtures used outdoors can be regarded as spotlights. Applicable occasions: Suitable for shopping malls, exhibition halls, parking lots, playgrounds, gyms, parks, building facade and public corridor, stair corridor and other indoor and outdoor lighting.
Solar Street Lighting Advantages: No need to lay cables, no AC power supply, no electricity charges; DC power supply, light-sensitive control; good stability, long life, high luminous efficiency, easy installation and maintenance, high safety performance, energy-saving, economical and practical. Solar Powered Street Lights are widely used in urban main and secondary roads, residential areas, factories, tourist attractions, parking lots and other places. Read additional information on chz-lighting.com.
Brightness: This is a measure of the magnitude of light produced by each lamp. There are street lamps that can deliver light to a circumference of up to 100m. Such light is critical in illuminating more oversized items that would otherwise be darkened at night. Most public spaces, such as open markets, depend on this brightness to continue transacting even at night. Most of these street lamps have an in-built photo sensor that ensures that the lamp is only on in low light conditions. In other words, the manufacturers of these lamps have been critical in ensuring that all the lamps operate only at night or in places where the lighting is poor. The LED lights do not function effectively during the day.
Waterproof problems in the installation of LED street lights: After ensuring the quality of the lamp holder, you need to pay attention to the technical problems of the lamp holder installation and construction. Most of the led street light controllers are installed in the lampshade and battery box, and generally will not enter water, but in actual engineering cases, some are due to improper installation or The circuit board of the controller is not treated with three-proof paint, which will cause a short circuit due to rain water flowing into the led street light controller along the external wiring of the controller terminal. Therefore, during construction, attention should be paid to bending the internal connecting wires of the controller terminals into a “U” shape and fixing them, and the connecting wires exposed to the outside are also fixed to a “U” shape, so that rainwater cannot enter and cause the controller to short circuit. You can also apply waterproof glue on the inner and outer line interfaces to waterproof.
CHZ Lighting is a professional lighting manufacturer integrating production and sales. With more than 10 years of lighting experience, we provide our customers with high quality LED lighting products and lighting solutions. Our products include street lamps, solar street lamps, floodlights, factory lights, garden lights, tri-proof lights, panel lights and tube lamps. We have assisted customers in Europe, America, South America, Southeast Asia, Africa and other countries to successfully complete roads and highways. Parking lots, airports, terminals, factories, shopping malls, shops, squares and other lighting projects have won wide acclaim from customers. By comparing product quality, actual energy saving after use, professional and timely communication process, and after-sales service, they have recognized the advantages of our company and deepened their loyalty. Hope to provide quality services to more customers, welcome to visit our company.