Excellent street lights wholesale provider: DALI Dimming – It is a communication interface called a digital addressable lighting interface (DALI). It allows brightness control, color temperature control, recall preprogrammed settings, group control, and error diagnosis capabilities. It transmits data using the existing power lines to control a set of lights. Pulse-Width Modulation (PWM) – It is a method of turning the LED on and off faster than the frequency cycle. The rapid cycling decreases brightness and pulse width. It is a more common technique in small street LEDs. NAMA Connector – Photocells can connect to the light using a NAMA connector with 3-pin, 5-pin, and 7-pin configurations. A photocell connection with the 3-pin NAMA connector will turn the light ON/OFF based on ambient light. A 7-pin connector provides the flexibility of brightness control with lighting conditions. See more information on led flood light manufacturers.
Roadway lighting dates back to ancient civilizations. Lighting techniques that revolved around fire quickly rolled out after electricity and light bulbs were invented. Modern roadway lighting utilizes light-emitting diode (LED), high-pressure sodium (HPS), or high-intensity discharge (HID) lamps to brighten up roads in low-light conditions. As the world moves towards robust products with longevity, LEDs stand out as the best type of lamp for roadway lighting. Countries are reluctant to switch to new technologies quickly due to the fear of the public’s response and feedback resisting change. However, companies have solved the rising concerns through innovation and user-driven design considerations.
LED Type Floodlight – These floodlights use a semiconductor device popularly known as a Light-Emitting Diode (LED). When an electric current passes across the LED, it emits light photons, which give visible light. Unlike their traditional incandescent or filament bulbs, they don’t generate heat up a filament to produce light. LEDs are solid-state devices, so they are much more energy efficient. They generate a small amount of heat. They offer longer life spans than 100,000 hours, meaning fewer replacements, saving money and time. They produce instant illumination, unlike halogen lights, which take time to heat filament. It makes them best suited for security purposes. Due to their solid-state circuitry, they are less prone to external shocks, environmental impacts, and damage from frequent on-off cycles. A high-end LED flood light can withstand up to 90% relative humidity and voltage fluctuation between 100-277V. It may also feature an IP65 / IK09 rating with a life span of >50,000 hours.
Office Lighting is a high-grade indoor lighting fixture. Its outer frame is anodized by aluminum alloy. The light source is LED. The whole lamp design is simple and elegant, and the atmosphere is luxurious. It has good lighting effect and can bring people the feeling of beauty. The LED flat panel light is unique in design, and the light passes through the high light transmittance light guide plate to form a uniform planar light-emitting effect, and the illumination uniformity is good, the light is soft, comfortable and bright, and the eye fatigue can be effectively alleviated. LED panel lamp can also prevent radiation and will not irritate the skin of pregnant women, the elderly and children. Suitable for hotels, bars, western restaurants, cafes, home interiors, and other indoor lighting, it can directly replace the original ordinary fluorescent lamps, and its brightness is higher. Applicable occasions: Suit for Office, school, hospital, conference room, hotel,shopping malls, clothing stores and museums, galleries, cultural centers and other places.
CHZ Lighting helps customers choose the most appropriate led lighting products and offer corresponding technical supports after understanding their overall needs. Customers only need to provide us with some basic engineering information. (Take led street light as an example, the information customers need to offer includes road width, pole height, pole position, pole spacing, average illumination requirement, etc.) Based on the provided information, our designers can then use Dialux simulate lighting effects and offer multiple design options to customers.
Because the LED garden lamp has the characteristics of versatility, aesthetics, landscaping and decorating the outdoor environment, it is also called landscape LED garden lights. It has the characteristics of energy-saving and high efficiency. It is mainly used for lighting up the urban slow lanes, narrow lanes, residential quarters, tourist attractions, public places such as parks and plazas, which can extend the time people spend in outdoor activities and improve the safety of properties. Applicable occasions: Widely used in urban roads, parking lots, bicycle lanes, gardens, plazas, residential areas and other outdoor venues.
Enclosure: Using efficient Fishbone radiator with elegant appearance. The die-cast aluminum housing is electrostatically sprayed, sprayed with a polyester powder coating, treated with an anti-corrosive primer, and cured in a 180oC oven. Cable: Using silicone rubber cable for safe and efficient power input. It is secured in the cable gland with screws. Warranty: 5 year warranty for the entire lamp. Do not attempt to disassemble the casing as this will break the seal and invalidate all warranties. Certificates: ENEC, TUV, and RoHS. Quality Control: Strict testings including high and low temperature testing, waterproof testing, shock testing, aging testing, tensile testing, salt spray testing, are conducted to ensure long-term performance. See more information on https://www.chz-lighting.com/.
The following are some of the specifications used to differentiate street lights from other sources of light. Operating Temperature: This refers to the optimal temperature at which these lights operate. This specification is key to all outdoor lamps. The lamps are usually helpful at night. Therefore, on average, these lamps operate at a low temperature of up to 2 degrees Celsius. The manufacturers have significantly factored in the fact that the lights can be installed in areas that experience winter seasons each year. The modular LED street light uses a die-cast aluminum shell, which has strong heat dissipation capacity and greatly improves the heat dissipation efficiency. In addition, the LED lamp beads inside the luminaire are separated and dispersed, which reduces the heat accumulation inside the luminaire and is more conducive to heat dissipation. LED street lights have good heat dissipation and natural long service life.
Rust prevention of LED street light poles: The problem of rust prevention of street lamp poles is also very important. The main methods are hot-dip galvanizing, cold galvanizing, and plastic spraying. Hot-dip galvanizing is recommended. This can prevent serious corrosion of the exterior of the light pole, and can make the street light use for a longer time. The waterproofing of LED street lights directly affects the service life of street lights. In order to avoid additional maintenance work and high maintenance costs in the later period, we must pay special attention to the waterproof problem of the lamps. The first thing to do is to find a manufacturer with a good reputation and good after-sales service to eliminate unnecessary problems and troubles in the product.
The indoor table tennis room originally used 36 1000W lighting light boxes, the glare was serious and unevenly distributed, and the field illumination was less than 100lx, which was not conducive to the development of table tennis. In order to ensure the professionalism of table tennis lighting,CHZ-LIGHTING uses 124 36W professional anti-glare LED panel lights, which are made of special water chestnut plates, UGR<19, and are reasonably arranged above the venue. After testing, the average illuminance of the venue is above 300lx, the uniformity is above 0.6, the light is soft and bright, and there is no glare interference. The healthy eye-protecting light makes the eyes more comfortable.