High quality altitude valve factory: Pressure Testing: Conduct regular pressure tests on the valve to ensure it is functioning correctly and within the required pressure range. This can help identify any issues or potential problems before they become more severe. Calibration: Calibrate the valve periodically to ensure it is operating at the correct set point. Adjust the valve as necessary to maintain the required water level or pressure. Replacement of Components: Replace any worn or damaged components, such as gaskets, seals, or springs. Use only manufacturer-approved replacement parts to ensure compatibility and avoid potential problems. Regular Maintenance Schedule: Develop and follow a regular maintenance schedule for the altitude valve, including routine cleaning, lubrication, inspection, and testing. Read even more details on altitude valve.
Float control valve is a modulating valve that accurately controls the liquid level in tanks. This valve is designed to open fully when the liquid level reaches a preset low point, and close drip-tight when the level reaches a preset high point. The float pilot is remotely installed Inside of reservoir, or Integrally installed with main valve for size less than 4 Inch. Our hydraulic float valve can stop overflow or overfilling while the valve connector connects the valve to the incoming liquid. When the float rises to a selected level, the float level control valve is then opened or closed by the lever attached to the float.
FBGD is a double eccentric flange butterfly valve, with soft seal on the body, it has the lowest operational torque, much less wearing, the dovetail seal design has been proven over half century service with reliability. Features: The butterfly valve is made of DI body and DI disc; Advanced newly design with dovetail seal design and captured by epoxy on the back, with multiple raised ring to have more contact with disc but less friction during closure; The double eccentric design provides less contact area of seal with disc, and less stress at the open position of the disc; The disc design with arch shape and thru disc can provide better flow capacity, stronger and less weight . The shaft and disc connection with tangential pin which can be exchangeable and provide rigid connection. The DN 100-500MM use flat disc, and DN 600-1200MM use arch shape disc; Epoxy coated interior and exterior. Valve design meets or exceeds EN 593; Top flange connection meets ISO 5211-1982, and F/F meets EN 558-1 series 13 & 14.
GV-Resilient seated gate valve is a soft seal disc which is fully encapsulated with rubber. The valve is designed with new technology for light operating, no clogging and no corrosion, good resilient memory & long service life. It can be used extensively in all kinds of water supply & sewage, fire-fighting and function as a shut-off or regulating valve. Features: Newly advanced design, less operation torgue & abrasion resistance; Body & Cover are made of high grade Ductile Iron; Disc is designed with an abrasion resistant nylon guide which can help less opening or closing torgue and smooth during operation; Forged stem provide stronger stem operation and less moving parts; Disc is covered by high-grade rubber which complies with drinking water; High-tech rubber curing with precise geometry dimensions, more resilient & strong adhesive to ductile casting; The 3 O-ring stem seals are designed to prevent stem leakage. and provide replacement of the O-ring without disassambling of valve from mainline pipes; Both inside & outside are coated with epoxy resin powder; Manufacturing standard meets BS EN 1074, BS 5163, BS EN 1171; F/F (Face to Face) meets the following standard: BS EN558-1. Discover extra details on https://www.shsuotevalve.com/.
Altitude valves are commonly used in elevated water storage tanks, reservoirs, and other structures where maintaining a specific water level or pressure is important. They help ensure a reliable water supply, prevent overflow or underflow, and protect against potential damage or loss. In addition to their use in water distribution systems, altitude valves can also be found in firefighting systems, irrigation systems, and other applications where controlled water levels or pressures are crucial. Overall, altitude valves play a vital role in maintaining water system stability by regulating water levels and pressures, ensuring efficient and effective water management.
Surge anticipating valve is indispensable for protecting pumps, pumping equipment and all applicable pipelines from dangerous pressure surges caused by rapid changes of flow velocity within a pipeline. When a power failure take place, the abrupt stopping the pump can cause dangerous surges in the system which could result in severe equipment damage. Power failure to a pump will usually result in a down surge in pressure, followed by an up surge in pressure. The surge anticipating control valve opens on the initial low pressure wave, diverting the returning high pressure wave from the system. In effect, the valve has anticipated the returning high pressure wave and is open to dissipate the damage causing surge. The surge anticipator valve will then close slowly without generating any shock. Looking for quality surge anticipating control valve, visit here today!