200w ufo led high bay light factory today: Looking for exclusive agents. Anticipate cooperation with you. as long as our customers come up with the requirements, we will meet them perfectly. What’s more, we are increasing our customers which are exclusive agents in some area or country, our exclusive agent has right to deal with any questions in their country or area. Now we have an exclusive agent –Brecolights Nigeria Limited who is located in Lagos, they are responsible for African markets such as Uganda, Ghana, South Africa, Tanzania, etc, especially for Nigeria, We are using Eurolight as our brand in Nigeria. If you are from the above countries, you can contact them to buy our LED products. Except for the above countries, just contact us if you would like to be our exclusive agent. Read extra info on wall wash recessed lighting. Longest Lifespan: Most of the led lights we produced in 2013 until now are still working well. A long lifespan will save you much more cost for replacements.
Instantaneous start-up. No need for a pre-warm-up start-up. Low Light decay. It is 1% decrease at 3000 hours. 3% decrease in 10000 hours. Environment-friendly. Led floodlights do not contain mercury, toxic gases, and liquids, and will not pollute the environment. At the same time, some lamps can be replaced and reused by outdoor LED flood light bulbs. As the latest generation of lighting fixtures, LED floodlights have the characteristics of environmental protection, energy saving and high luminous efficiency. More and more people choose it to replace traditional metal halide flood light or HPS flood light. So, what is a LED floodlight equivalent to metal halide/HPS flood lights?
Wattage is a measure of the energy consumption of a lamp, not the amount of light it emits. For led floodlights, generally 10W to 1000Watt optional. For small places, it is enough for 10W-50Watt, they are suitable for installation at a height of 3-5 meters. Then the higher wattage is better choices for higher place. The beam angle of the led flood lights are wide or narrow, and the range is between 3°～140°. Different application places have different requirements for the luminous angle. For some trees, landscapes or building outlines, it is more suitable to choose a narrow beam angle led floodlights, which can play a key part of the lighting effect, highlighting the characteristics of the illuminated object. However, for large spaces, then the wide distribution floodlights will be much better, such as 120° or 70*140°.
GRNLED (Golumen) is the best magnetic track lighting manufacturer, factory, and supplier in china since 2018, with ISO9001:2015, providing high-quality magnet track light with Osram, Philips chips, and 2.4G TUYA WIFI, BLUETOOTH, ZIGBEE smart magnetic track lighting system with low voltage DC48V or 110V/220-240VAC input voltage at a competitive price. Our magnetic linear track lights have been CE RoHS approved. It is ok to do ETL, UL, CSA, SAA, and CB magnetic track lights if needed.
Explosion proof flood LED light: It refers to a floodlight used in dangerous places where combustible gas and dust exist, and can prevent arcs, sparks and high temperature that may be generated inside the lamp from igniting combustible gases and dust in the surrounding environment, so as to meet the requirements of explosion-proof. It belongs to a special kind of lamp, and its protection level is higher than that of conventional floodlights. Suitable for various indoor and outdoor operations and construction sites such as flammable and explosive places, oil fields, offshore oil platforms, ships, metallurgy, petrochemicals, etc.
How many watts is a solar street light? The wattage of a solar street light can vary greatly depending on the size and type of the light. Generally, a solar street light will range from 10 to 150 watts. What are the disadvantages of solar street lights? High Initial Cost: Solar street lights require a significant upfront investment. The cost of a single solar street light can range from $2,000 to $5,000, depending on the size and type of the light. LED street lamps emit white light when the color temperature is around 5000K, and yellow or warm white light when the color temperature is around 3000K. In fact, yellow light or warm white light around 3000K is more suitable for road lighting, while the color temperature of LED street lights around 5000K is not suitable for road lighting. Because the color temperature of 5000K will make people feel very cold and dazzling, which will cause people’s vision to be overly fatigued, and under this color temperature condition, people’s ability to observe in the distance will also decrease, reducing the driving safety of drivers. In addition, in rainy and foggy weather, LED street lights with a color temperature of 5000K have poor penetration ability, which also affects the travel safety of pedestrians.
The adjustable magnet spotlight is improved on the base of the magnetic grid spotlight, but it is available to be 90° adjustment as non-directional lighting, what is more, its beam angle is 24°/36° narrow distribution, generally, widely used for accent lighting for wall washer, background wall, painting, etc. 0-10V/DALI/Smart dimmable available, matt black/matt white body option. The Magnetic track spotlights are based on traditional LED track lights with track heads with magnets. At the same time, the low-voltage DC48V input scheme is adopted. Other parameters and specifications are almost the same, CRI90 Philips Osram CREE COB chips, power includes 10W 15W 20W 30W. Mainly application for kitchen room, dining room, and wall washer lighting as accent light fixtures.
What should I look for when buying solar street lights? Quality of the solar panel: Make sure the solar panel is of good quality and is able to generate enough power to charge the battery. Battery capacity: Make sure the battery has enough capacity to power the lights for the desired amount of time. you can check this blog: “What types of battery is the best for solar street lights?” to know more information about batteries. Lumens: Make sure the lights are bright enough to provide adequate illumination.
Third, the temperature of the LED flood light is too high. Generally, this kind of light appears in the LED flood light fixtures with built-in power supply. If the driver has an over-temperature protection function, and the material heat dissipation performance of the lamp cannot meet the requirements, the driver over-temperature protection will start to work and there will be flicker, for example, 20W floodlight housing is used to assemble 30W lamp, in this case, the heat dissipation will be too bad to working well. Discover even more info at https://grnled.com/.