Best rated led downlight supplier: Do Your Homework on Energy Savings: If you’re going to buy LED landscape lighting, then doing your homework on how much money you could save on energy is a must. While it’s true that all of the bulbs are more environmentally friendly, not all of them will save you as much money on your electric bill as others. One way to make sure that you end up saving money long term is to calculate how much electricity each fixture uses per hour and then compare this number with the current energy costs in your area. Some LED lighting options can actually use more electricity than incandescent and fluorescent lights! Find more info on led panel manufacturers.
Where are the magnetic LED lights used? These LED magnetic lights are mainly as home lighting for the kitchen, dining room, living room, and bedroom, it is available to design different pattern, which will make your home lighting system stylish, and modern. of course, it is also okay to be used for office lighting together with LED panel lights, or as commercial lighting in supermarkets, etc. What are the components of the magnetic track lighting system? The entire magnetic lighting system like traditional track lighting consists of 3 parts – magnetic rails, magnetic lighting fixtures, and accessories. Each part has something to pay special attention to. Let’s go over the main points of each part in detail.
Wattage is a measure of the energy consumption of a lamp, not the amount of light it emits. For led floodlights, generally 10W to 1000Watt optional. For small places, it is enough for 10W-50Watt, they are suitable for installation at a height of 3-5 meters. Then the higher wattage is better choices for higher place. The beam angle of the led flood lights are wide or narrow, and the range is between 3°～140°. Different application places have different requirements for the luminous angle. For some trees, landscapes or building outlines, it is more suitable to choose a narrow beam angle led floodlights, which can play a key part of the lighting effect, highlighting the characteristics of the illuminated object. However, for large spaces, then the wide distribution floodlights will be much better, such as 120° or 70*140°.
DOB Led flood lights: “DOB” is the abbreviation of “Driver on board”, which means that the power supply is on the board. The so-called DOB led floodlights means that the AC power supply and led chips are integrated on the PCB at the same time. It is also called driverless AC LED flood lights. The cost of this luminaries is the lowest, but in terms of quality, it is not as good as floodlights with constant current drive. Moreover, the input voltage of most DOB Flood lights can only be 220-240VAC, and the power factor is generally only about 0.5-0.6. Africa, Middle East, Southeast Asia, South Asia, South America non-developed markets. This kind of lamps is not suitable for commercial and industrial projects and places with strict quality requirements.
Durability: Make sure the lights are made of durable materials that can withstand the elements. Warranty: Make sure the lights come with a good warranty in case of any defects. a good solar street light manufacturer or supplier will provide 3years warranty at least. Which sensor is used in solar street light? A light-dependent resistor (LDR) is typically used in solar street lights to detect the presence of light. The LDR is used to detect the amount of light present and to turn the street light on or off accordingly.
Instantaneous start-up. No need for a pre-warm-up start-up. Low Light decay. It is 1% decrease at 3000 hours. 3% decrease in 10000 hours. Environment-friendly. Led floodlights do not contain mercury, toxic gases, and liquids, and will not pollute the environment. At the same time, some lamps can be replaced and reused by outdoor LED flood light bulbs. As the latest generation of lighting fixtures, LED floodlights have the characteristics of environmental protection, energy saving and high luminous efficiency. More and more people choose it to replace traditional metal halide flood light or HPS flood light. So, what is a LED floodlight equivalent to metal halide/HPS flood lights? Technical Support: It is ok to support IES files to do Dialux simulation, providing installation, maintenance guidance, or technical training and lighting design solutions.
The magnetic track light is the latest lighting solution, there is a magnet on the track head of the lamp body, which can be adsorbed on the aluminum magnetic attraction rail track with an iron sheet, and can be removed, installed, and moved freely without tools. Generally, the whole system is consists of the magnetic track, magnetic led light luminaries, and accessories. It is available to do DIY track lighting system by above magnet lamps.
The magnetic pendant light is a cylinder downlight with hanging ropes for suspended installation as decorative lighting, It is generally used as auxiliary lighting and is mostly used in the study room, bedside table, above the dining table. The CREE/OSRAM/PHILIPS COB chip brings a perfect lighting performance, Magnetic track lighting is a linear track system with magnetic rail and removable magnetic lights, the entire magnetic track lighting system is driven by low-voltage DC24V or DC48V.On the low-voltage magnetic guide rail, various types of lamps such as magnetic line lights, magnetic spotlights, and magnetic chandeliers can be safely combined, freely moved and disassembled. Just read this blog to know the details about it if needed.
What should I look for when buying solar street lights? Quality of the solar panel: Make sure the solar panel is of good quality and is able to generate enough power to charge the battery. Battery capacity: Make sure the battery has enough capacity to power the lights for the desired amount of time. you can check this blog: “What types of battery is the best for solar street lights?” to know more information about batteries. Lumens: Make sure the lights are bright enough to provide adequate illumination.
LED is latest technology in lighting, it can be saving much more 60% at least then traditional metal halide flood lamps, for example, 20W LED Flood light is ok to replace 150Watt old floodlights. All of old flood lights fixtures are with E27 OR R7S bulb, there are same e27 and R7S LED Bulb to replace them, it is easy to do replacements. Just check if the input voltage of led flood light bulb is same as existing metal halide bulb, because there are 220-240VAC Input and 110-120VAC input types optional around the world. See more info at https://grnled.com/.
Looking for exclusive agents. Anticipate cooperation with you. as long as our customers come up with the requirements, we will meet them perfectly. What’s more, we are increasing our customers which are exclusive agents in some area or country, our exclusive agent has right to deal with any questions in their country or area. Now we have an exclusive agent –Brecolights Nigeria Limited who is located in Lagos, they are responsible for African markets such as Uganda, Ghana, South Africa, Tanzania, etc, especially for Nigeria, We are using Eurolight as our brand in Nigeria. If you are from the above countries, you can contact them to buy our LED products. Except for the above countries, just contact us if you would like to be our exclusive agent.