Coriolis mass flowmeter supplier right now: Differences Between coriolis vs magnetic flow meter – While both mass flow meters and magnetic flow meters are used to measure the flow of fluids, there are several key differences between the mass flow meter vs magnetic flow meter: Accuracy: Both mass flow meters and magnetic flow meters are known for their accuracy. But mass flow meters are generally considered to be more accurate, especially in applications where the temperature or pressure may vary. Compatibility: Mass flow meters are compatible with a wide range of fluids, including gases, liquids, and slurries. Magnetic flow meters, on the other hand, are only suitable for conductive fluids. Find even more info on turbine flow meter manufacturer.
Flow measurement of some low-viscosity oils, such as gasoline, kerosene, diesel, and heavy oil, residual oil, etc. whose viscosity is reduced by heating. Water flow measurement of large-diameter pipelines, among which the full-tube vortex flowmeter is mainly used for small and medium diameter pipes, while the insertion vortex flowmeter can be used for large-diameter (DN≥300mm) pipeline flow measurement. It is widely used in urban water pipelines and industrial water mains in chemical, electric power, metallurgy, papermaking, chemical fiber and other enterprises.
Comprehensively consider the use requirements and procurement costs of gas turbine flowmeters. When the customized gas turbine flow meter did not appear in the domestic brand, the international brand can be said to be a super profitable product. A medium-sized gas turbine flow requires hundreds of thousands or even hundreds of thousands of yuan. And our domestic brands struggle tenaciously in a harsh environment where the strength and weakness are not an order of magnitude at all. It can be seen that when selecting a gas turbine flow meter, there are many factors to be considered, not only from before the purchase, but also after the purchase of the gas turbine flowmeter, all of which need to be considered. When choosing a gas turbine flowmeter, you must be careful!
Thermal mass flow meters are suitable for all industrial and test platform applications that require fast, accurate gas measurement. The insertion thermal mass flow meter directly indicates the mass flow or standardized volume flow of the gas without any additional pressure and temperature compensation. They have impressive high accuracy, short response times and a very wide flow range, with almost no loss of accuracy even at the lowest flow. Read extra information at bjssae.com.
Beijing Sincerity has developed over years to manufacture the Coriolis Mass Flow Meters industries. Through continuous research, development and transformation, we have become the leader of the Coriolis Mass Flow Meters industries in China. The Coriolis measuring principle is used in a wide range of different branches of industry, such as the life sciences, chemicals, petrochemicals, oil and gas, food, and – no less importantly – in custody transfer applications. Coriolis flowmeters can measure virtually all fluids: cleaning agents, solvents, fuels, crude oil, vegetable oils, animal fats, latex, silicon oils, alcohol, fruit solutions, toothpaste, vinegar, ketchup, mayonnaise, gases or liquefied gases.
When the vortex gas flow meter is installed behind the pressure reducing valve, the saturated steam suddenly decompresses greatly, the fluid expands adiabatically, the water droplets partially evaporate, and at the same time absorbs the heat of vaporization from the liquid and vapor phases, reducing the temperature of the vapor and liquid phases. If the temperature is not lowered much or the humidity is higher before evaporation, the temperature will quickly drop to the saturation temperature corresponding to the new pressure, and a new equilibrium will be established. At this time, the steam is still saturated steam. If the pressure drops a lot or the humidity before evaporation If the temperature is lower, the temperature is still higher than the saturation temperature corresponding to the new pressure due to the evaporation of water droplets, and the steam becomes superheated steam.
American first unit of coriolis mass flow meter entered China SINCE 1987. Beijing Sincerity belongs to the state owned enterprise, which is Beijing institute of chemical industry, SINOPEC automation instrument department. SINOPEC has invested large amount of money to ask Beijing Sincerity to develop the VERY FIRST Chinese domestic coriolis mass flow meter since 1987. Chinese very first unit of U shape coriolis mass flow meter was successfully developed by Beijing Sincerity Group. Beijing Sincerity won the National Science and Technology progress awards. – SINCER 1989.