Excellent led street lights factory: The world still uses HPS and HID lamps due to their low initial costs. Therefore, they are relevant when compared with the latest LED technology. Each type of lamp has its advantages and disadvantages. This blog will explore the difference between types of lamps and dive into details of roadway LED light technologies to consider when purchasing. Types of Lamps Used in Roadway Lighting – Currently, the world utilizes the following three types of lamps for roadway lighting: High-Pressure Sodium (HPS) An HPS lamp’s primary materials are xenon gas, sodium, and mercury. The public can spot them on roadway lighting with bulbs that take three to four minutes to reach full brightness. The lamp’s power consumption is 100 lumens per watt. It is competitive with LED lamps, but their omnidirectional nature causes lower perceived light brightness. HPS technology has been around since the 1930s. Discover extra info on CHZ Lighting.
Floodlights illuminate a large indoor or outdoor area. They offer high-intensity ambiance lighting, which improves visibility and security. Most of their applications are in outdoor spaces, including sports fields, parking lots, rooftops, and streets. However, they are equally useful in large indoor spaces like warehouses and industrial setups. The unit measuring the power of any electrical device is “watts” (W). A watt defines the amount of electrical energy the device consumes per unit of time. Lumens (lm) is a unit representing the brightness of an illuminating device. It defines the perceived power of visible light in an environment lit by a source. These factors are of significant importance when selecting and purchasing a flood light.
Flip Chip COB – Flip-chip is the next step in LED manufacturing. There is no wire bonding step, which results in better illumination, as the semiconductors require less space and can have denser formations. Since there are no wires, there is a lower blockage, leading to a further increase in illumination. Typically, high-end street LEDs will feature a flip-chip COB. Driver on Board (DOB) – It is a less common design opted by LED manufacturers as it increases the heat load in one area. LEDs require power to light up. The circuit that powers them is called the driver. Some designs with compactness or low-power applications can have DOB LED designs. The driver is beside the set of LEDs mounted on the same substrate. It is better to have a driver in a separate compartment to improve heat transfer capabilities and avoid damage to components in high heat and harsh environments.
Industry Lighting is made of super bright LED white light as the light source, the shell is made of aluminum alloy (customer optional), the outer cover is made of high efficiency lens (customer optional), heat dissipation is made of copper sheet heat conduction and aluminum alloy strip heat dissipation natural air circulation The heat dissipation is more perfect, and the shape of the LED will be changed continuously according to the different needs of the customers.
Our LED light fixture can be divided into indoor LED lighting and outdoor LED lighting according to the place where LED lamps are used. Indoor lighting requires high brightness, good color consistency, high color rendering, and high versatility. Outdoor lighting requires high brightness, long life, and good resistance to harsh environments. Our LED lamps feature high luminous efficiency, low energy consumption, long life, safety, and environmental protection. They can operate for more than 50,000 hours without failure, widely used in factories, warehouses, shopping malls, roads and other public places that require long-term lighting.
Because the LED garden lamp has the characteristics of versatility, aesthetics, landscaping and decorating the outdoor environment, it is also called landscape LED garden lights. It has the characteristics of energy-saving and high efficiency. It is mainly used for lighting up the urban slow lanes, narrow lanes, residential quarters, tourist attractions, public places such as parks and plazas, which can extend the time people spend in outdoor activities and improve the safety of properties. Applicable occasions: Widely used in urban roads, parking lots, bicycle lanes, gardens, plazas, residential areas and other outdoor venues.
Applicable occasions: roads, streets, and factories, parking lots, rural, mountainous and remote areas, yards, schools, squares and other outdoor environments. It helps boost domestic traditional lighting to green new energy LED lighting. Certificates: CE, RoHS, ISO9000, ISO14000. CHZ Lighting, as the leading solar street light manufacturer and factory, is able to provide top lighting soluton service for your projects, all in one solar street light wholesale, just contact us now! Find more details at chz-lighting.com.
Brightness: This is a measure of the magnitude of light produced by each lamp. There are street lamps that can deliver light to a circumference of up to 100m. Such light is critical in illuminating more oversized items that would otherwise be darkened at night. Most public spaces, such as open markets, depend on this brightness to continue transacting even at night. Most of these street lamps have an in-built photo sensor that ensures that the lamp is only on in low light conditions. In other words, the manufacturers of these lamps have been critical in ensuring that all the lamps operate only at night or in places where the lighting is poor. The LED lights do not function effectively during the day.
In recent years, we have heard more, and more people talk about smart street lights, but in many cases it is not very clear what a smart street light is. Compared with common street lamps, what special functions do smart street lamps have? Smart street lights refer to street lights that realize remote centralized control and management of street lights through the application of advanced, efficient and reliable power line carrier communication technology and wireless GPRS/CDMA communication technology. Smart street lights have automatic brightness adjustment and remote lighting control according to traffic flow, Active fault alarm, lamp cable anti-theft, remote meter reading and other functions can greatly save power resources, improve the level of public lighting management and city management, and save maintenance costs.
The indoor table tennis room originally used 36 1000W lighting light boxes, the glare was serious and unevenly distributed, and the field illumination was less than 100lx, which was not conducive to the development of table tennis. In order to ensure the professionalism of table tennis lighting,CHZ-LIGHTING uses 124 36W professional anti-glare LED panel lights, which are made of special water chestnut plates, UGR<19, and are reasonably arranged above the venue. After testing, the average illuminance of the venue is above 300lx, the uniformity is above 0.6, the light is soft and bright, and there is no glare interference. The healthy eye-protecting light makes the eyes more comfortable.